IK Foam Pro 2 +
IK FOAM Pro 2 + #81678
The IK FOAM Pro 2 + handheld sprayer is a foam generator designed for cleaning tasks in various sectors.
Foam Pro 2 + can be actioned two different ways: manually or with the compressed air connector. This valve is widely used in the field of pressurized tires. It enables the tank to be pressurized by means of generic compressor modules such as those intended for tire inflation. The air connector makes the pressurization process faster and easier by using widely commercially available devices with no need of manually pumping it.
This sprayer has a wide filling mouth, ergonomic design, safety valve set at 3 bar (depressurisable), base for greater stability, colored caps to identify the contents of the tank, safety lock on the opening and closing system.
It is equipped with three mixers (orange, grey and green) which allow to vary the type of foam by choosing between wet, intermediate or dry foam.
With the use of the foam we manage to increase the contact time between the chemical and the surface to be cleaned, cleaning fabrics and upholstery avoiding excessive soaking which generates the appearance of fungus and bacteria, and finally having greater visual control of the sprayed surface.
The easy manual assembly and disassembly of the IK Foam Pro 2 +, allows a complete maintenance without the use of tools.
Where to use:
- Cleaning and disinfection
- Automotive and detailing
For use with:
- Foaming agents (Optimal)
Technical information
| Valve | Tared at 3 bar / 43,5 psi despresurizable |
|---|---|
| Standard nozzles | Special nozzle with fan-type foam |
| Useful capacity | 1,25 L - 42 Oz. |
| Total capacity | 1,9 L - 64 Oz. |
| Gross weight | 0,7 kg - 1,54 lbs. |
| Net weight | 0,56 kg - 1,23 lbs. |
Cleaning & Maintenance:
- Depressurise the sprayer and clean it with water after every use.
- Check the correct operation of the safety valve by triggering the mechanism every now and then and making sure that it releases pressure smoothly.
- Collect and dispose of the residual amount according to the legislation, prescriptions, and applicable regulations.
- In the event of obstruction of the nozzle, clean it with water and do not use metallic objects.
- Clean the tank regularly after each use. Rinse with clean water and, if necessary, use specific detergents to remove stubborn residues.
- Safety: Removing chemical residues prevents possible unwanted reactions and protects the health of spray operators.
- If the filter of the handle is clogged, remove it and clean it with water.
- Store the sprayer under cover, avoiding freezing temperatures and extreme heat (between 5°C and 30°C).
- To prolong the life of the seals, regularly apply grease to the moving parts of the sprayer.