Keyway Repair Kit w/ Historic Pointing Mortar

Supplies needed to reset a monument into a keyway base.

Kit Includes:

• Historic Pointing Mortar - (moderate strength or high strength)
• 4 Blue Shop Towels
• Marshalltown 3/8" Tuck Pointer (optional)
• Marshalltown 6"x2" Margin Trowel (optional)

Histocal® Traditional Masonry And Grouting Mortar MG II / IIa, Fine

Pre-Blended NHL based mortars - Just add water.
For applications and mortar joints less than 1/4 inch wide.

Technical Data
Product Brochure

Water Consumption
0.75L/Gallon Mortar
Composition
HISTOCAL® Historic Masonry and Grouting Mortar MG II/IIa (fine) consists of natural hydraulic lime NHL 5 acc. to EN 459-1 and grainclassified crushed lime sands.

For laying bricks and grouting of historic masonry (e.g. natural stones, bricks). We recommend our HISTOCAL® Historic Masonry- and Grouting Mortar MG IIa in case of buildings subjected to humidity.

The substrate must be dry, clean and free from loosely attached particles. Sufficiently wet absorbing masonry before.

Protect fresh mortar by keeping moist until sufficient hardening. This will take several days to several weeks. The mortar must be protected against frost for several weeks until sufficient hardening has been achieved!

The air and surface temperature must be at least 5 ° C and maximum 25 ° C. HISTOCAL® Historic Masonry and Grouting Mortar MG II (fine) shall only be used in the original state without additives.

Dry, if possible on wooden shelves and protected against draft.

Grain size: 0-1.2 mm
Solid mortar raw density: approx.1.65 kg/dm³
Compressive strength 28 days: approx. 3 N/mm²
Flexural strength 28 days: approx. 1.0 N/mm²
E-Module: approx. 3.5 kN/mm²