Skip to content
Restoration Contest Submission Deadline is December 31st!
Restoration Contest Submission Deadline is December 31st!
Contact Policies About Atlas News
Akepox 5010 Knifegrade-Akemi-Atlas Preservation

Akepox 5010 Knifegrade

by Akemi
$88.50 - $238.50
$88.50
$88.50 - $238.50
$88.50
Size: 450 Gram Tubes

Akemi Akepox 5010 Knifegrade - 450 Grams or 2.25 KG

Gel-like, 2-component construction adhesive, color resistant, only slight tendency to dis-color, ideal for coloring.

For face joints indoors and outdoors-particularly where they are visible. For quadratures and restoration work in contact with mortar, ideal for white natural and artificial stone.

Product Details

  • Clear + UV stable
  • Very neutral color w/ no yellowing
  • Because of its gel like consistency it has a high creep strength
  • During hardening there is very little shrinkage, and therefore minimal tension within the adhesive joint
  • The bonding are very weather resistant
  • It can be excellently colored with Akepox Colorant
  • *Atlas Pro Tip* Blend Akepox 5010 with Fine Marble Sand when repairing marble to give a seamless finish*

Mixing ratio 2:1

Safety Data Sheet Part A     Safety Data Sheet Part B     Technical Data Sheet

Questions & Answers

Have a Question?

Ask a Question

  • Need product to safely repair historic marble tablet gravemarkers.

    The Akepox 5010 is the most popular and preferred epoxy for repairing historic tablet gravestones. It is clear and UV stable and will never yellow. It is also extremely strong.

  • What is the shelf life of this epoxy unopened and then when opened?

    Unopened this will last at least 2 years with proper storage. After opened it's best to be used within 1 year.

  • Hi Looking for an adhesive to repair old slate headstones...................... What products do you have and/or recommend

    Akepox 5010 is the best epoxy for this application.

  • This material can use for Italian marble joint filling

    Yes, this product is excellent for this application. Akepox 5010 is clear, food-safe, and can be pigmented with the Akemi Colorants.

  • Hi. What are the minimum and maximum temperatures for usage when repairing gravestones?

    You generally want to use Akepox 5010 at temps 50°F and above, and at temps 100°F and below.

  • What would you recommend for repairing a slate headstone, that if you look at it from the side it is split right down the middle completely through, almost it’s entire height?

    The Akepox 5010 is what you want! You can repair the break and then, if possible, mix some epoxy with crushed slate dust to use as infill. If not 5010, Akepox 2010 is your next best bet.

Customer Reviews

Based on 9 reviews
89%
(8)
11%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Paul Campbell
Our experience with 5010 Epoxy

Totally Amazed, very easy to work with . The set up time is Perfect , allows ample time to mix and set . Here is our first 2 projects. And our Customer is very Impressed .
I am a Sexton for 3 Townships of 6 Cemeteries. A whole lot of work ahead of us . We also use the Tombstone Jack set . And that is a Must have setup .
Thank you very much for your product and Service .

User picture User picture
G
Gary Veeder
1700-1800 burials

This stone was broken into three pieces, repaired with Akepox. Sturdy for 6 months sure hope it lasts many many hyears. This is a Revolutionary War era cemetery with a Patriot burial of a Captain

User picture
J
Jodie Myers
5010 Epoxy

This is the best epoxy by far. It hold tight and sets up semi fast. It gives you time to set it properly. Will not use anything else. Worth every penny.

J
Jeff Palmer
Solid

Good stuff! Easy to mix and apply. Connection is solid!

T
Tyler
God Tier Epoxy

The uses for this product never end. Whenever I'm able I spring for this epoxy. It's ability to mix with marble and fill cracks is beyond impressive and the fact that it doesn't yellow is so so important as it often ends up being the face of a lot of the work I do.

12