Shield Max® - 1 Quart by Graffiti Solutions Save Liquid error (product-badge line 32): Computation results in '-Infinity'% $27.50 1 2 3 4 5 6 7 8 9 10+ Quantity Quantity Add to cart DRYING PERIOD The protected surface will be water and graffiti resistant after 2 hours and dry after 4 hours. Ultimate protective effect will be achieved after 72 hours. APPEARANCE Transparent, mostly invisible dependent on type of surface. UV resistant. Weather, water and graffiti resistant. NOTE: Some building materials can darken or become shiny. SHIELD MAX® is an invisible water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint and marker or felt tip pens. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surfaces to breath. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A sacrificial protection coating will always need to be re-applied after every removal process to re-protect the surface. General Instructions: APPLICATION INSTRUCTIONS Preparation: Clean off both graffiti and other contamination, such as traffic dirt, wax, oil and paint residue, etc. from substrate. Mask and protect windows in a suitable manner. Ideal temperature for external application should be between 50 F-95 F. Minimum temperature is 47 F. Relative humidity must not exceed 95%. Exterior Protection: Shake or stir product well prior to use. SHIELD MAX can be applied with an airless sprayer, hand trigger sprayer, pump sprayer or roller. The protection is applied 2-3 times. NOTE: Allow some intermediate drying. SHIELD MAX can be applied to a damp, not wet, surface. Runs and/or excessive application can easily be washed off with water, following completion of work. Interior Protection: Painted substrate can be protected using a squeegee, brush, roller or with low pressure spray in combination with a squeegee. The protection is applied three times. EXTERIOR REMOVAL INSTRUCTIONS Method 1 - Normal Substrate:Remove graffiti with high pressure hot water at 1000-2000 PSI and 190 F. In difficult case GRAFFITI SOLUTIONS Graffiti Removers are used in a conventional manner. Re-protect cleaned area. Method 2 - Sensitive Substrate:Apply SHADOW MAX® with a low pressure sprayer. Allow a few minutes for the remover to act and then rinse off with hot water at 800-1200 PSI and 190 F. The method is most suitable when substrate is brittle. INTERIOR REMOVAL INSTRUCTIONS Painted Substrate: Dampen the area with SHADOW MAX® and wipe off the graffiti with cloth. If possible, use high pressure hot water and wet vac machines. Porous Substrate: Rinse off with hot water and wet vac. When removing graffiti, the protective coating is also normally removed. Re-protect 2-3 times with SHIELD MAX. Specifications Consistency: Use concentrated. SHAKE WELL before use. Coverage: Coverage varies according to the porosity of the surfaces and how much the material soaks up the product by capillary action. Concrete, rough cast cement, bricks, etc: 200-400 square feet per gallon. Sandstone, cinder blocks and other absorbent surfaces: 80-200 square feet per gallon. Use Temperatures: Ideal surface temperatures are between 50°F - 95°F. Relative humidity is not to exceed 95% Storage: Stores between 40°F and 130°F. DO NOT FREEZE. If frozen, thaw and remix before using. Keep out of the reach of children. Flammability: Nonflammable, non-combustible. V.O.C.'s: .4 lbs./gal., 50 grams/liter H. A. P. S. -none. Volatility: Very low rate of evaporation. Ventilation required in confined areas. Biodegradable: Yes Shipping: Not regulated, D.O.T. Proper shipping name: Cleaning Compound N.O.S., Class 55. Technical Data Sheet Safety Data Sheet