Skip to content
12 Days of Atlas Christmas & FREE Holiday Crewneck w/ Orders $250+
12 Days of Atlas Christmas & FREE Holiday Crewneck w/ Orders $250+
Contact Policies About Atlas News
Titanium - Flowing Glue - 1 Liter-Tenax-Atlas Preservation

Titanium - Flowing Glue - 1 Liter

by Tenax
$23.50 - $23.50
$23.50
$23.50 - $23.50
$23.50

Tenax Titanium - Flowing Glue - 1 Liter

Titanium is ideal for seaming, laminations, miter cuts, chip repair on all granite, marbles, quartz and quartzite materials

Tenax Titanium has been developed with the latest Vinyl Ester technology. Titanium is ideal for seaming, laminations, miter cuts, chip repair on all granite, marbles, quartz and quartzite materials. Transparent with a slightly blue-purple color, Titanium does not darken after cure. Titanium is superb on white and light colored marble, quartz, and quartzite materials. Takes color very well for darker stones.

Tenax Titanium is very fast and has very good workability. Easy to stir and spread. Stays a flowing consistency even after adding the hardener. Tenax Titanium has excellent adhesion in a short amount of time which enables the stone to be handled in a very fast time even at low temperatures. After curing Tenax Titanium has a flat surface with a high gloss and is very polishable. After the addition of the hardener the glue will change color but will return to the original white color after a few minutes. This can be used as a catalyst indicator. Tenax Titanium contains a UV absorber. Exceptional strength for cnc and line machine use right after cure. Excellent for indoor applications and outdoor applications that stay above 32°

Product Details

  • Excellent adhesion in short amount of time
  • Superb on white and light material
  • Very polish-able
  • Colors easily

Instructions For Use

Make sure the surface to be treated is dry, clean and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. Mixing ratio resin to catalyst is 100:2/3 (see chart below). Stir vigorously and apply. Do not place unused product back in the can. Make sure can is sealed tightly after use.

25°C = 77°F

Shelf Life

Keep away from heat, humidity and sun. Product will last at least 10 months if kept between 68°F - 77°F.

Technical Information

  • Mixing Ratio: 100+2/3
  • Gel time at 77°: 4-6 min
  • Tacky free time at 77°: 18-20 min
  • Working time at 77°: 20-25 min
  • Temp. range for use after hardening: 32°-230°

Safety Data Sheet
Technical Data Sheet
Purchase extra hardener here

Questions & Answers

Have a Question?

Ask a Question

  • Titanium - Flowing Glue - 1 Liter Does this come yith catalist?

    Yes this comes with the catalyst

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Esteban A
Great product, great supplier.

Placed an order after asking a few questions. Atlas preservation answered them all and were very helpful. The epoxy worked great to fill in some holes I have on my terrazzo floor. They also guided me to some dyes tenax makes to use with this epoxy. The repairs came out great. A word of advice, when figuring out how much hardener to add, the easiest way to do it is with a small jewelry scale set to grain weight. The manufacturer recommends between 1-2% harder to epoxy ratio. So I went with 1.5 to be on the safe side. Weigh the epoxy, then multiply the epoxy weight by .015 and that will give you the weight of the hardener you need. The epoxy hardens in a few minutes so you have to be quick when using it.

User picture