Endurance Gravestone & Monument Cleaner
Over the past three years, Atlas Preservation has collaborated with a team of chemists to develop a new gravestone cleaning product designed to remove biological and atmospheric staining. It has proved in extensive field testing to have higher efficacy and to be less expensive than competitor products and is also based on the cleaning action of quaternary ammonium compounds and is in alignment with the NCPTT comparative study and research.
Endurance Restoration Gravestone & Monument Cleaner
Works to clean and remove staining caused by atmospheric pollution and biological growth including mold, lichen, moss, algae, mildew, etc.
ENDURANCE GRAVESTONE MONUMENT CLEANER is ready-to-use; No dilution is required. Apply with a squeeze trigger or pump sprayer directly to the surface. Ideal and safe for use on stone and masonry surfaces, including limestone, marble, granite, slate, cement, etc. Also effective for use on vinyl, wood, roofing, siding, awnings, and more. Use in temperatures above freezing (>32°F).
Ask us about samples!
Surfaces: Limestone, marble, granite, slate, cement, terra cotta, vinyl, wood, roofing, siding, awnings, and more!
Cleaning Methods
Application Only – Highly effective for all stone and masonry. No brushing or rinsing required; rain provides natural rinsing. Recommended for fragile or eroded stones.
- Saturate stone from top to bottom with Gravestone & Monument Cleaner.
- Cleaner percolates deeply under the surface for long-term effects.
- Water reactivates cleaning action, from rain, dew, or misting.
Application, Brushing, and Rinsing – Suitable for stable stones, especially modern granite monuments.
- Saturate stone with cleaner. Let dwell on surface for 15 minutes
- Remove loose lichen with a soft plastic scraper, if needed.
- Lightly brush with soft-bristle brushes. Mist with water to keep surface wet while brushing.
- Rinse thoroughly with potable water.
Coverage: Ranges from approximately 200-400 sq ft/gal
(Coverage will vary depending on the porosity of the surface)
Important Note:
- Thoroughly saturate surrounding grass and plants with water to minimize absorption and provide protection from cleaner.
- The stone may temporarily change colors, most commonly orange, red, or black. This is called the blushing effect. The discoloration will fade within a few days without rinsing and is not harmful to the stone.
Safety Data Sheet
Technical Data Sheet
Practical solutions to common problems that withstand the test of time
www.endurancerestoration.com