Skip to content
Use code ATLAS for 10% off your first order with us! 💥 FREE 48StateTour reusable totes w/ orders $150+
Use code ATLAS for 10% off your first order with us! 💥 FREE 48StateTour reusable totes w/ orders $150+

Keyway Repair Kit w/ Historic Pointing Mortar

Original price $25.50 - Original price $56.25
Original price
$25.50 - $56.25
Current price $25.75
Mortar: Moderate Strength Fine - Quart
Tools: 3/8" Tuck Pointer

Supplies needed to reset a monument into a keyway base.

Kit Includes:

  • Historic Pointing Mortar - (moderate strength or high strength)
  • 4 Blue Shop Towels
  • Marshalltown 3/8" Tuck Pointer (optional)
  • Marshalltown 6"x2" Margin Trowel (optional)

Histocal® Traditional Masonry And Grouting Mortar MG II / IIa, Fine

Pre-Blended NHL based mortars - Just add water.
For applications and mortar joints less than 1/4 inch wide.

Technical Data
Product Brochure

Water Consumption
0.75L/Gallon Mortar
HISTOCAL® Historic Masonry and Grouting Mortar MG II/IIa (fine) consists of natural hydraulic lime NHL 5 acc. to EN 459-1 and grainclassified crushed lime sands.


For laying bricks and grouting of historic masonry (e.g. natural stones, bricks). We recommend our HISTOCAL® Historic Masonry- and Grouting Mortar MG IIa in case of buildings subjected to humidity.


The substrate must be dry, clean and free from loosely attached particles. Sufficiently wet absorbing masonry before.


Protect fresh mortar by keeping moist until sufficient hardening. This will take several days to several weeks. The mortar must be protected against frost for several weeks until sufficient hardening has been achieved!

Special notes

The air and surface temperature must be at least 5 ° C and maximum 25 ° C. HISTOCAL® Historic Masonry and Grouting Mortar MG II (fine) shall only be used in the original state without additives.


Dry, if possible on wooden shelves and protected against draft.

Technical data

Grain size: 0-1.2 mm
Solid mortar raw density: approx.1.65 kg/dm³
Compressive strength 28 days: approx. 3 N/mm²
Flexural strength 28 days: approx. 1.0 N/mm²
E-Module: approx. 3.5 kN/mm²

Questions & Answers

Have a Question?

Ask a Question
  • The headstone is very lose in the keyway and I'm concerned the headstone will topple over. What product should I use?

    You want to use Historic Pointing Mortar - Moderate Strength Fine to secure a headstone in a keyway base.

  • Can I color match this compound with akepox epoxy colorant?

    The Akepox Colorant is made to be used with the Akepox Epoxies. We recommend using Solomon Colors to tint mortar!