Skip to content
Use code ATLAS for 10% off your first order with us!
Use code ATLAS for 10% off your first order with us!

Rivo 50 - 1+1 Liter

by Tenax
Original price $49.50 - Original price $49.50
Original price
$49.50
$49.50 - $49.50
Current price $49.50

Tenax Rivo 50 A + B EPOXY - 1+1 Liter

Medium speed curing epoxy - 50 minute working time maximum

Rivo 50 A & B is a knife grade epoxy designed for all types of stone. Rivo is one of the strongest epoxies in the stone industry. It will bond to almost any surface. Rivo 50 is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. Recommended for both interior and exterior applications. Material must be dry before application. Straw in color. VOC Compliant.

Instructions For Use:

Make sure surface to be treated is completely dry and clean. Keep the glue and hardeners in their original cans. If using an automatic dosing pump avoid contact with metals made of copper, brass or similar metals which may rust. Avoid use of PVC plastic. Use only plastic that is corrosive resistant. Measure out, in either weight or volume, the correct amounts of part A and part B. Mix well using clean tools. Best when applied in a thin layer. Use acetone or butyl acetate to clean tools.

Shelf Life

Keep the containers closed after use. Keep away from heat, humidity and sun light. This product will last 2 years under normal conditions between 65° and 77°.

Safety

Please read the safety data sheet before use and follow the product instructions.

Technical Specs

  • Gel time in bulk at 77ºF: 50 min
  • Tacky free time at 77ºF: 150 min
  • Minimum reaction temperature: 50ºF
  • Temp range for use after hardening: -13º to 143ºF
  • Ratio of glue to hardener: 1:1 mix ratio
  • Time for polishing or cutting at 77°F: 24 hours
Technical Data Sheet
Safety Data Sheet PART A

Safety Data Sheet PART B

Questions & Answers

Have a Question?

Ask a Question
  • How long for Rivo 50 to fully harden? How long should you wait before infilling a crack that has been repaired with Rivo 50?

    Rivo 50 will begin to harden in about 50 minutes once the product is mixed and applied. You can begin infill around 50-60 minutes after application!