STRIPSOL LO - Non-Hazardous Stripping Agent
EaCo Chem STRIPSOL LO - Non-Hazardous Stripping Agent
Stripsol LO (low odor) is a solvent-based sealer, stain, and paint stripper that has a wide range of applications. Stripsol LO will remove layers of acrylics, acrylic latexes, polyurethane, and other resin coatings. The product’s low odor allows it to be used indoors and out. Alkyd enamels can be stripped using a two-step process. First apply Stripsol LO. While still wet apply Stripper Cream. Stripsol LO has little to no damage on most substrates. This includes wood, glass, metals, aluminum trim, and masonry surfaces.
For Use On: The product’s low odor allows it to be used indoors and out.
Use to Remove: Layers of acrylics, acrylic latexes, polyurethane, and other resin coatings.
- Does not burn skin
- Plants may be damaged by direct contact * Do not use on asphalt shingles and vinyl siding
Coverage rates will vary from 125-250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.
Use undiluted (straight).
Always test prior to beginning full-scale cleaning operations. Pre-testing will determine suitability and effectiveness on each type of surface and stain designated to be cleaned. Pre-testing will also determine dwell times and number of applications required to achieve desired results. Pre-testing will show any potential or adverse reactions to adjacent surfaces. Allow test areas to thoroughly dry before evaluating final appearance and results
Always wear goggles and chemical resistant gloves when handling this product. Read the Safety Data Sheet for additional safety and health hazard information prior to use.
Check out our Paint Stripping Manual for great tips, techniques, and choosing the proper product for the job, whether you're removing paint, stain, adhesives, or graffiti.