TeEtch Etch & Water Mark Remover 8 oz

Tenax TeEtch Etch & Water Mark Remover - 8 oz

TeEtch is a polishing compound specially formulate to remove etch marks, water marks, water rings, dull spots and even light scratches on marble, travertine, limestone, alabaster, and onyx stone. Simply apply a spoon full of TeEtch over the etch or water mark. Using a rag, rub the TeEtch over the blemish by hand. After 2 or 3 minutes the etch or water mark will be mechanically removed and repolished back to the original factory finish. TeEtch may also be used with a buffer.

TeEtch is a polishing compound specially formulated to remove etch marks and other discolorations from calcareous stone. Some of the discolorations that might be treated using TeEtch include:

• Etch Marks
• Water marks
• Water Rings
• Dull Spots
• Light Scratches

Some of the specific materials on which you can use this product with good results include:

• Marble
• Limestone
• Travertine
• Alabaster
• Onyx

Directions for Use:

Using TeEtch is simple and etching can be cleaned up by following these steps:

1. Apply a spoonful of TeEtch compound to the discoloration you are removing.
2. Using a cloth, rub the TeEtch over the blemish using a circular motion.
3. After 2 to 3 minutes, the etch will be removed from the surface of the stone.
4. TeEtch may also be used with a buffer.