White Scum Presoak - Remove White Deposits from Brick, Block, and Concrete
SHIPPING INCLUDES HAZMAT FEE
EaCo Chem White Scum Presoak - 1 Gallon
Deposit Removal Presoak
White Scum Presoak is designed as a pre-soak to facilitate the removal of white scum on block, brick or concrete. White Scum Presoak followed with NMD 80 can be used to remove calcite from concrete masonry units (CMU). Used in conjunction with NMD 80, this combination will ensure the complete removal of white scum.
White Scum Presoak provides powerful penetration and softening action of white scum.
First apply the White Scum Presoak undiluted and allow it to dwell on the deposit only for approximately five to ten minutes. Apply NMD 80 using an EC Jet (dilutes four parts water to one part solution (4:1) automatically) without rinsing off the White Scum Presoak; allow a five to ten minute dwell time. Rinse completely with a pressure washer to get the desired results. Repeat as necessary.
For Use On: Block, brick, and concrete
Use to Remove: White scum and other deposits
Product Details
- For Block and Concrete
- Powerful Penetrating and Softening of Deposits
- Can Remove Deposits from CMU
- Must follow with NMD 80
Coverage
Coverage rates will vary based on severity of build-up. Proper testing will determine actual coverage rate.
Dilutions
White Scum Presoak is always used undiluted
Pre-Testing
Always test prior to beginning full-scale cleaning operations. Pre-testing will determine suitability and effectiveness on each type of surface and stain designated to be cleaned. Pre-testing will also determine dwell times and number of applications required to achieve desired results. Pre-testing will show any potential or adverse reactions to adjacent surfaces. Allow test areas to thoroughly dry before evaluating final appearance and results
Safety Information
Always wear goggles and chemical resistant gloves when handling this product. Read the Safety Data Sheet for additional safety and health hazard information prior to use